Electrical Safety Tester- 10 Lead ECG

A comprehensive full function Electrical Safety Analyzer that tests the electrical safety of any medical equipment.

The LKG 610, Electrical Safety Tester is designed to test any piece of medical equipment. The full featured Electrical Safety Analyzer is microprocessor controlled and has a full compliment of ten leads.

The LKG 610, Electrical Safety Tester measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition it performs lead ISO tests and point to point measurements.

Tests are quickly and easily performed when the appropriate test function key is pushed. Measurements results are presented on the large LCD display and measurements units are clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts.
 

Calibrated test points are available to ensure performance accuracy and repeatability. Either the AAMI and IEC 601 test loads may be selected. The receptacle is fused with an accessible 20 A fuse and the tester is fused internally. The comprehensive LKG 610, Electrical Safety Tester provides the best combination of features, performance, and value of any portable electrical safety analyzer.  Measurements Specifications Measurements Specifications Measurements Specifications Measurements Specifications
	Easy to use Compact Full Function Analyzer Measures leakages: Case, Isolation, ECG leads , point to point Measures Resistance: Ground wire, Leads Test Points: 100 Micro Amps, 1000 Milli Ohms 15 and 20 Amp Capability 10 Lead ECG leads Best Value Line Voltage Cord Resistance Case Leakage Current Earth Leakage Current Leads Leakage Current Leads ISO Test Instrument Current Point-to-Point Measurement Technical General Technical General Measurement Range Resistance: 0 - 1999 mW Leakage Current: 0 - 1999 µA Instrument Current: 0 - 19.99 A Accuracy Resistance : ± 2% ± 1 LSD Leakage : ± 1% of FS DC to 1 KHz ± 1 LSD, ± 2% of FS DC to 1 KHz to 100 KHz, ± 4% of FS 100 kHz to 1 MHz Instrument Current : ± 2% ± 1 LSD Controls 12 Push Button Function Keys Open / Closed Neutral Switch Normal / Off / Reverse Polarity Switch Momentary Ground Open Switch 10 Universal Snap / Post ECG Connectors Test Load Selector Switch Calibrated Test Points Reference Ground: 1W Leakage: 200 µA Display : ± 2% ± 1 LSD Physical Dimensions : 8.0 x 4.5 x 2.0 inches (20.3 x 11.4 x 5.0 cm) Weight : 2.5 lbs (1.1 kg) Power Requirements : 110 VAC 50 - 60 Hz, 20A  220 VAC 50 - 60 Hz, 10 A Environmental Operating Range : 59º to 95º F (15º to 35º C) Storage Temperature : 0º to 122º F ( -18º to 50º C) Relative Humidity : 90% (max) at temperatures   Part Number Description Price 535 LKG 610, 110 VAC 535 - 220 LKG 610, 220 VAC 535 - Case Soft Carrying Case 503 Test Cable

NETECH CORPORATION. © 2006 -2007, All Rights Reserved.
This site is best viewed in 1024 X 768 pixels. Powered by Winds online